News & Insights

Blog

Industry insights, technical guides, and the latest updates from our manufacturing facility.

Suspension GeometrySep 28, 2026

Suspension Anti-Dive and Anti-Squat Geometry: A Practical Tuning Guide

Anti-dive and anti-squat are not 'more is better' numbers — they are a tuning window. This guide shows you how to calculate percentages, measure link angles, and find the right balance for your vehicle.

Read Article

Suspension SystemsSep 28, 2026

Automotive Suspension System Working Principle: Springs, Dampers, Geometry, and Unsprung Mass

A physics-first explanation of how springs, dampers, and linkages convert road input into controlled wheel motion — written for parts buyers and mechanics who need to evaluate suspension components, not just name them.

Read Article

Suspension ManufacturingSep 28, 2026

Coil Spring Manufacturing Process: How Winding, Material, and Finishing Decide Performance

Two coil springs can share wire diameter, free length, and coil count yet behave completely differently on the road. This manufacturer-level breakdown explains how hot vs cold winding, material grade, stress relief, shot peening, scragging, and coating are chosen for automotive springs — and how those choices show up in load consistency, fatigue life, corrosion resistance, and handling.

Read Article

Suspension EngineeringSep 27, 2026

Suspension Kinematics Analysis: A Practical Guide to Roll Center Migration, Camber Curves, and Component Decisions

Suspension kinematics analysis is a geometry decision tool, not a validation exercise. This guide shows you how to set up a kinematic model, interpret roll center migration, camber gain, bump steer, and motion ratio, and translate those curves into arm lengths, pickup points, ball joint travel, and bushing stiffness choices.

Read Article

Technical GuidesSep 27, 2026

Suspension Kinematics and Compliance Test – MTS: A Parts Manufacturer's Guide to Reading K&C Data

A K&C test rig measures how your suspension actually moves under load. This guide explains how to read MTS K&C data as a parts-development decision tool — diagnosing whether a handling problem lives in bushings, arm geometry, or compliance rates.

Read Article

Technical GuidesSep 27, 2026

Automotive Suspension Testing & Validation: A Buyer's Guide to Reading Supplier Evidence

A supplier saying a part is 'tested' tells you almost nothing. This guide explains the difference between testing, validation, and compliance — and gives you a repeatable framework to evaluate suspension test claims before you specify or stock parts.

Read Article

Suspension RepairSep 27, 2026

How to Replace Control Arms and Bushings to Fix a Bouncy Suspension

A diagnostic-first guide to separating control arm and bushing bounce from strut and shock bounce, then replacing the parts correctly with ride-height torque and a mandatory alignment.

Read Article

Suspension RepairSep 27, 2026

How to Replace Control Arms and Bushings to Fix a Bouncy Suspension

A diagnostic-first guide to replacing control arms and bushings. Learn why post-replacement bounce is usually an installation error—specifically torquing bushings at full droop—and how to diagnose, replace, and verify the repair correctly.

Read Article

Suspension & SteeringSep 27, 2026

Front Suspension Rebuild – ChrisFix: A Decision-First Guide for DIY Mechanics

A decision-first front suspension rebuild guide that answers the searcher's real question — 'Do I actually need a rebuild, and what does it take?' — by combining symptom-based diagnosis, a real cost/tool breakdown, and a manufacturer's view on replace-vs-rebuild and OEM-vs-aftermarket.

Read Article

Suspension & SteeringSep 27, 2026

Rear Shock Absorber Replacement: A Diagnostic-First Guide for DIYers

Confirm the rear shocks are actually the failed component, handle banded and electronic units safely, and evaluate a $1,300 quote before you turn a wrench.

Read Article

Suspension & SteeringSep 27, 2026

How To Replace Rear Shock Absorbers: A Diagnostic-First Guide

Rear shock replacement starts with confirming the diagnosis, not buying parts. This guide covers symptom-based testing, shock type selection, a torque-correct install procedure, and the post-install checks that prevent comebacks.

Read Article

Automotive DIY & RepairSep 27, 2026

Shock Absorber Installation Tips: Torque, Pairing, and Avoiding Common Mistakes

A manufacturer-grounded guide to shock absorber installation that treats the job as a torque-and-pairing decision, not just a wrenching procedure. Learn how to confirm shocks are the failed component, when to replace in pairs, what tools and rental options O'Reilly offers, how to avoid installation errors that shorten new shock life, and what to check after the first 100 miles.

Read Article

Explore Our Products